A common fault of paper box sealing
The paperbox sealing machine is simple to operate, but there will still be some failures
due to improper operation. The following are some common failures of the box
sealing machine and solutions to provide some emergency solutions for the
operator of the box sealing machine:
The nail
formation of the sealing machine is insufficient or the action is too slow, the
reason: the inner piece is worn, the screw is loose or the position of the
front buckle shaft is wrong.
Solution:
replace the inner piece of the trigger or slightly adjust the front button
shaft up or down slightly adjust the front button shaft, and then run the
machine separately.
The main
reason why the piston rod is easy to leak is that the bottom ring of the main
body wears away due to long time operation. The bottom ring should be replaced
in time.
The
trigger is easy to leak, the main possibility is the damage of the switch valve
ring or switch seat ring damage, should also be replaced in a timely manner. In
addition, the vent is easy to leak, may be the piston ring damage, pay
attention to timely replacement.
Transmission
can not be accurately positioned, the reason: may be plastic steel or
transmission spring inelastic. Solution: remove the trigger assembly first,
reinstall the spring tip or replace it with a new plastic strip and drive
spring.
评论
发表评论